SERVICE
We have ASA certified Mercedes, BMW, and Audi mechanics and perform all factory recommended services.
- All repairs performed minor and major, mechanical and electrical.
- Dealer level testers for resetting service lights and indicators, reading all vehicle control systems including engine, transmission, brakes, suspension and airbag, control module coding and programming, and reading actual values.
- Only OEM parts used to ensure proper fit and high quality. Aftermarket parts available upon request. Aftermarket part warranty through manufacturer only. Labor warranty does not apply to aftermarket parts.
- All aftermarket warranty work is welcome.
- Visual inspection performed with every service.
- Normal total savings between 30-50% from local Mercedes, BMW and Audi dealer
Click on a logo to view service information for that make.

MERCEDES BENZ MAINTENANCE SERVICES
Model year 1998 and newer vehicles have a Flexible Service System indicator which lets you know when it is time for service. When this indicator is activated bring your car to our certified service center where expert technicians perform the routine maintenance and Flexible Services.
Generally, you can expect to drive your Mercedes approximately 10,000 miles between services and as many as 20,000 miles, depending on which model you drive, how you drive it and the severity of your driving conditions. Click on the links below for more information about a particular service.
Back to top
BMW MAINTENANCE SERVICES
Please refer to the chart below for your BMW's service schedule. Click on the name of a service to see more information. All mileages are approximate. Please see our Service Interval Lights page for more detail on needed services for your vehicle.
7500 miles |
10,000 miles |
15,000 miles |
Oil Service |
15,000 miles |
20,000 miles |
30,000 miles |
Inspection I |
22,500 miles |
30,000 miles |
45,000 miles |
Oil Service |
30,000 miles |
40,000 miles |
60,000 miles |
Inspection II |
37,500 miles |
50,000 miles |
75,000 miles |
Oil Service |
45,000 miles |
60,000 miles |
90,000 miles |
Inspection I |
52,500 miles |
70,000 miles |
105,000 miles |
Oil Service |
60,000 miles |
80,000 miles |
120,000 miles |
Inspection II |
67,500 miles |
90,000 miles |
135,000 miles |
Oil Service |
75,000 miles |
100,000 miles |
150,000 miles |
Inspection I |
82,500 miles |
110,000 miles |
165,000 miles |
Oil Service |
90,000 miles |
120,000 miles |
180,000 miles |
Inspection II |
97,500 miles |
130,000 miles |
195,000 miles |
Oil Service |
105,000 miles |
140,000 miles |
210,000 miles |
Inspection I |
112,500 miles |
150,000 miles |
225,000 miles |
Oil Service |
120,000 miles |
160,000 miles |
240,000 miles |
Inspection II |
127,500 miles |
170,000 miles |
255,000 miles |
Oil Service |
135,000 miles |
180,000 miles |
270,000 miles |
Inspection I |
142,500 miles |
190,000 miles |
285,000 miles |
Oil Service |
150,000 miles |
200,000 miles |
300,000 miles |
Inspection II |
Back to top
AUDI
Keeping up with your vehicle’s Scheduled Maintenance is the best way to keep your Audi delivering all the performance and passion you love. It’s also a great way to help protect the value of your vehicle and your investment. Audi recommends you take your vehicle only to authorized Audi dealers to ensure that vehicle repairs are performed to the highest specifications.
Your authorized Audi dealer has the proper tools and equipment, the staff of trained specialists, and access to the extensive range of parts necessary to properly maintain your vehicle’s safety, reliability, and value for years to come. Ask us if your Audi vehicle is due for Scheduled Maintenance or consult your Maintenance book.
Some of the services we offer for Audi vehicles include:
- Full synthetic oil change using OEM parts
- Timing belt and tensioner using OEM parts
- Automatic transmission fluid change with OEM fluid and parts
- Coolant flush with original Audi coolant
- Fuel filter replacement with OEM parts
- Spark plug replacement with OEM parts
- Brake flush with original Audi/VW brake fluid
- Front OEM brake pads
- Rear OEM Brake pads
- OEM Air filter replacement
- And more!
Back to top
SERVICE SCHEDULES
Find the maintenance schedule for your Audi model. Click on an icon to download the Service Schedule for your model year. You must have Adobe Reader or Adobe Acrobat installed in order to view these files.

Get Adobe Reader
Back to top
FLEXIBLE SERVICE A
Engine compartment
Visually check
- Leakage, major components
- Engine oil and filter change
- Check and correct fluid levels
- Top off fluid level of window washer system
- Check condition of poly V-belt
- Check engine hood and safety catch for proper operation
- Check Battery acid level replenish
- Check battery using Midtronics Tester
Vehicle passenger compartment
Function check
- Horn, headlamp flasher, hazard flashers, turn signals
- Warning/indicator lamps, illumination and interior lighting
- Replace bulbs as necessary headlamps, fog lights, and some third brake lights extra cost.
- Reset FSS counter in instrument cluster
Wheels and brakes
- Check thickness of brake pads
- Check condition of brake discs
- Correct tire inflation pressure
- Inspect tires for damage and condition
- Measure tread depth
- Check play in front and rear wheel bearings
Underside of vehicle
- Check condition of front axle ball joints
- Check condition of steering mechanical components
- Inspect play of tie rod and drag link joints
- Inspect rubber boots for damage or wear
- Inspect exhaust system and hangers for damage or leaks
- Check for damaged/worn drive train parts
- Check for excessive axle joint play
Back to top
FLEXIBLE SERVICE B
Engine compartment
Visually check
- Leakage, major components
- Chafe marks, line routing, components in the event of leakage, determine cause and perform repair via separate work order.
- Engine oil and filter change
- Check and correct fluid levels
- Engine cooling system, anti-freeze and corrosion protection
- Brake system
- Windshield washer
- Power Steering System
- Top off fluid level of window washer system
- Replace dust filter
- Replace air filter
- Check condition of poly V-belt
- Throttle linkage, check function and condition
- Check engine hood and safety catch for proper operation
- Check Battery acid level & replenish
- Check battery using "Midtronics" Tester
Vehicle passenger compartment
Function check
- Horn, headlamp flasher, hazard flashers, turn signals
- Warning/indicator lamps, illumination and interior lighting
- Exterior lighting incl. headlamps
- Inspect headlamp range adjustment system (does not apply to xenon headlamps)
- Replace bulbs as necessary headlamps, fog lights, and some third brake lights extra cost.
- Inspect headlamp setting, adjust to correct setting
- Windshield wipers, rear window wiper, windshield washer system
- Headlamp cleaning system
- Check seat belts for damage and proper function
- Reset FSS counter in instrument cluster
- Replace wiper blade for front/rear window
- Check body for paint damage
- Check chassis and supporting body parts for damage and corrosion
- Check level control if equipped
Wheels and brakes
- Inspect wheels, rotate if necessary
- Check thickness of brake pads
- Check condition of brake discs
- Check brake pads for lining thickness front/rear
- Check condition of brake discs front and rear
- Check parking brake (function test only)
- Correct tire inflation pressure
- Inspect tires for damage and condition
- Measure tread depth
- Check play in front and rear wheel bearings
Underside of vehicle
- Check condition of front axle ball joints
- Check condition of steering mechanical components
- Inspect play of tie rod and drag link joints
- Inspect rubber boots for damage or wear
- Inspect exhaust system and hangers for damage or leaks
- Check for damaged/worn drive train parts
- Check for excessive axle joint play
Trunk
- Correct tire inflation pressure in spare tire
Note: this is a generic Flexible B service. Certain vehicles may require additional work at certain time and mileage intervals.
Back to top
FLEXIBLE SERVICE C
Service includes:
- All of the A Service and B Service.
- Replace Fuel Filters.
- Service the transmission.
- Replace the power steering fluid and filter.
- Reminder card for next service needed.
Back to top
BMW INSPECTION I
Undercarriage
- Change engine oil and filter while engine is at normal operation temperature.
- Check transmission for leaks.
- Check rear axle for leaks.
- Visually check fuel tank, lines, and connections for leaks.
- Check condition, position, and mounting of exhaust system. Examine for leaks.
- Check power steering system for leaks.
- Check overall thickness of front and rear disc brake pads.
- Examine brake disc surfaces.
- Clean brake pad contact points in calipers.
- Grease wheel center hubs.
- Check steering for absence of play, condition of suspension track rods, front axle joints, steering linkage, and joint disc.
- Check front control arm bushing for wear.
- Check brake and clutch system connectors and lines for leaks, damage, and incorrect positioning.
- Check for free movement of the parking brake cables. Adjust parking brake if necessary.
- Check all tire pressures (including spare). Correct if necessary.
- Check condition of tires (outer surfaces (left/right)), tread wear and pattern; In case of uneven tread wear readjust wheel alignment if required.
Engine compartment
- Read out diagnostic system.
- Check engine cooling system/heater hose connections for leaks.
- Check coolant level and antifreeze protection level; add coolant if necessary.
- Check level of brake and clutch fluid in reservoir; add fluid if required.
- Check windshield washer fluid level and antifreeze protection. Fill up and/or correct if necessary.
- Check air conditioner for operation.
- Reset Service Indicator.
Body/electrical equipment
- Check battery electrolyte level and add distilled water if required.
- Perform batter load test.
- Check lighting system, i.e. headlights, foglights, parking, backup, license plate, interior (including map reading lights), glove box, flashlight, illuminated makeup mirrors, luggage compartment lights.
- Check instrument panel and dashboard illumination.
- Check all warning/indicator lights, check control.
- Check turn signals, hazard warning flashers, brake lights, horns, headlight dimmer/flasher switch.
- Check wiper and washer system(s); wiper blades, washer jet positions.
- Check condition and function of safety belts.
- Oil hood, trunk/tailgate, and door hinges.
- Grease hood, trunk/tailgate and door latches. Check operation of all latches.
- Check central locking/double lock.
- Replace microfilter or Acc. Cabin Filter.
- Check heater/air conditioner blower, rear window defogger.
- Check rear view mirrors
- Visually examine the SRS airbag units for torn cover, obvious damage or attachment of decals, decorations, or accessories.
Final inspection
- Road test with check of brakes, suspension, steering, clutch/manual transmission or automatic transmission.
Back to top
BMW INSPECTION II
Undercarriage
- Change engine oil and filter while engine is at normal operation temperature.
- Check transmission for leaks.
- Check rear axle for leaks.
- Visually check fuel tank, lines, and connections for leaks.
- Check condition, position, and mounting of exhaust system. Examine for leaks.
- Check power steering system for leaks.
- Check overall thickness of front and rear disc brake pads.
- Examine brake disc surfaces.
- Clean brake pad contact points in calipers.
- Grease wheel center hubs.
- Check steering for absence of play, condition of suspension track rods, front axle joints, steering linkage, and joint disc.
- Check front control arm bushing for wear.
- Check brake and clutch system connectors and lines for leaks, damage, and incorrect positioning.
- Check for free movement of the parking brake cables. Adjust parking brake if necessary.
- Check all tire pressures (including spare). Correct if necessary.
- Check condition of tires (outer surfaces (left/right)), tread wear and pattern; In case of uneven tread wear readjust wheel alignment if required.
- Check thickness of parking brake linings.
- Half-shafts; check for leaks at flexible boots.
- Inspect entire body according to terms of rust prevention limited warranty.
Engine compartment
- Read out diagnostic system
- Check engine cooling system/heater hose connections for leaks.
- Check coolant level and antifreeze protection level; add coolant if necessary.
- Check level of brake and clutch fluid in reservoir; add fluid if required.
- Check windshield washer fluid level and antifreeze protection. Fill up and/or correct if necessary.
- Check air conditioner for operation.
- Reset Service Indicator.
- Replace spark plugs (as applicable by year and model)
- Replace intake air cleaner element.
Body/electrical equipment
- Check battery electrolyte level and add distilled water if required.
- Perform batter load test.
- Check lighting system, i.e. headlights, foglights, parking, backup, license plate, interior (including map reading lights), glove box, flashlight, illuminated makeup mirrors, luggage compartment lights.
- Check instrument panel and dashboard illumination.
- Check all warning/indicator lights, check control.
- Check turn signals, hazard warning flashers, brake lights, horns, headlight dimmer/flasher switch.
- Check wiper and washer system(s); wiper blades, washer jet positions.
- Check condition and function of safety belts.
- Oil hood, trunk/tailgate, and door hinges.
- Grease hood, trunk/tailgate and door latches. Check operation of all latches.
- Check central locking/double lock.
- Replace microfilter or Acc Cabin Filter.
- Check heater/air conditioner blower, rear window defogger.
- Check rear view mirrors
- Visually examine the SRS airbag units for torn cover, obvious damage or attachment of decals, decorations, or accessories.
Final inspection
- Road test with check of brakes, suspension, steering, clutch/manual transmission or automatic transmission.
Back to top